99%
CRC Baled Scrap
CRC · Hydraulically baled
Cold-rolled coil scrap, baled for high-density, low-residual charging.
Elixir Metal Works · Mewat, Haryana · since 1969
Scrap Reimagined
Premium ferrous scrap for India's foundries.
Elixir Metal Works supplies CRC baled scrap and sheet cutting scrap (busheling) — clean, dense, low-residual charge material for SG (ductile) iron and grey iron production, delivered across India with a weighbridge slip on every load.
+91 98111 11186 | amit@bistgroup.com
- 60,000 tons
- Ferrous shipped annually
- 200+
- Foundries supplied
- Pan-India
- Road and rail dispatch
Scroll
Built for foundries
A ferrous supplier that thinks like a melting shop.
Elixir Metal Works is a ferrous scrap supplier, not a general-purpose trader. We prepare material to the grade your melt requires, quote transparently and document every consignment from our yard to your furnace door.
Consistent grade
Loads match the agreed grade on every weighment, with no surprises at the furnace.
Low-residual charge
CRC and busheling selected for minimal coating, rust and oil content.
High-density bales
Baled to reduce handling, speed up charging and improve melt yield.
Pan-India delivery
Road and rail dispatch with tracked loads and dependable delivery windows.
Transparent pricing
Index-linked rates, GST-compliant invoicing and no hidden deductions.
Repeat supply contracts
Standing volumes that keep your feedstock availability predictable.
Materials we supply
Full service list
Ferrous grades, prepared to specification.
Each stream is inspected, segregated and prepared so your charge behaves the same way, every time.
98%
Sheet Cutting Scrap
Busheling · CR and HR sheet
Trimmed sheet cuttings, sorted and sized into clean furnace busheling.
97%
Press Shop Punchings
Punchings · Stamping offcuts
Stamping-line punchings and offcuts, screened and de-oiled on request.
95%
Light Melting Scrap
LMS · Light gauge
Thin-gauge light melting scrap, baled to suit cupola and induction charging.
96%
Plate & Structural Cuttings
HMS · Plate and structural
Heavier plate and structural cuttings for charge-weight flexibility.
94%
Re-rolling End Cuttings
End cuts · Coil ends
Coil ends and re-rolling end cuttings, trimmed and bundled.
Services
From enquiry to the furnace door.
Six connected capabilities across sourcing, grading, baling, documentation and dispatch.
01
CRC Baled Scrap
High-density, low-residual sheet
Cold-rolled coil baled scrap, hydraulically baled to a consistent density with minimal coating and rust. A high-yield charge material for SG (ductile) iron and grey iron melts.
- Hydraulically baled to a consistent density
- Low residual content with minimal coating
02
Sheet Cutting Scrap
Clean busheling, sized for charge
Sheet cutting scrap trimmed from cold- and hot-rolled sheet processing, sorted to remove contamination and prepared as uniform busheling for direct furnace charging.
- Uniform cutting size, free of oversize
- Segregated from painted and coated sheet
03
Press Shop Offcuts & Punchings
Screened and prepared offcuts
Punchings and offcuts collected from stamping and press lines, screened to remove fines and flash and de-oiled before dispatch so your melt chemistry stays predictable.
- Collected from OEM stamping and press lines
- Screened to remove fines and flash
04
Grading & Inspection
Every lot checked before dispatch
Each lot is inspected, segregated by grade and cleared for contamination before it leaves the yard. Where your process requires it, we share chemistry data from our partner laboratory.
- Lot-by-lot visual inspection at the yard
- Segregation by grade and source
05
Logistics & Delivery
Pan-India road and rail
Road and rail dispatch across India with GPS-tracked loads and weighbridge slips, scheduled around the delivery windows that suit your melting plan.
- Pan-India road and rail dispatch
- GPS-tracked loads, sealed where required
06
Commercial & Documentation
Clear terms, complete paperwork
Straightforward commercial terms with transparent pricing, GST-compliant invoicing and repeat supply contracts that keep your feedstock availability predictable.
- Transparent, index-linked pricing
- GST-compliant invoicing and e-way bills
Recovered, not consumed
Every bale you see here came out of something already made.
Keep scrolling — the composition turns with you. CRC bales, sheet-cutting busheling, press-shop punchings and structural cuttings: the ferrous grades we return to India's foundries as clean charge material.
Our process
Five steps, fully documented.
A repeatable supply cycle built around foundry scheduling and clean paperwork.
01
Enquiry & Grade Discussion
Tell us the grade, tonnage and delivery schedule you need. We confirm availability and quote the same day.
02
Sourcing & Aggregation
Material is collected from press shops, sheet processors and OEM stamping lines across our supplier network.
03
Inspection & Grading
Every lot is inspected, segregated by grade and checked for contamination before it is accepted into the yard.
04
Baling & Preparation
CRC and light-gauge scrap is baled to density, while busheling is sized and de-oiled where your process requires it.
05
Weighing, Documentation & Dispatch
Each consignment is weighed, documented with a slip and GST invoice, then dispatched to your foundry.
Measured delivery
Performance you can hold us to.
We track grade consistency, dispatch punctuality and repeat orders, because those are the numbers that decide whether a supplier keeps your business.
99%
Grade consistency
Lots match the agreed grade on every weighment.
98%
On-time dispatch
Consignments leave the yard on the date promised.
96%
Repeat supply rate
Foundries reorder after their first delivery.
95%
Documented loads
Weighbridge slip and GST invoice on every consignment.
Our work
Inside the Processing Plant.
Photographed at our own yard: incoming sheet scrap, the shed that handles every load, baled stock ready to charge, and the coil intake our busheling comes from.
Ferrous scrap · Pan-India supply
Send us your grade and tonnage. We'll confirm availability and price.
Call +91 98111 11186 or send your requirement through our contact form. We confirm grade, availability and the delivery window the same working day.